SSRT HIGH TEMP PRESSURE – ONLINE MONITOR
SSRT Autoclaves & Tools
Loading devices: PC-controlled electromechanical loading device can perform slow strain rate tests (SSRT, CERT), constant-load and cyclic-fatigue tests. The loading device can be equipped with various kinds of specimen holders.
- PC-controlled loading device
- Proof rings
- The load capacities 10 kN, 20 kN, 50 kN and 100 kN are available
- Hydrogen Induced Cracking (HIC)
SSRT Autoclaves: Autoclaves for corrosion-testing purposes. The autoclaves can be adapted for various kinds of corrosion-testing applications. These Autoclaves equipped with recirculation loops, DC PD, LVDT, electrochemical tools, Loading devises and scratching devices.
- Temperature between –40ºC and 700ºC
- Pressure from Vacuum up to 100 MPa
- Volume typically<1-litre to 7-litre.
- Equipped with sapphire windows also.
Electrochemical Tools: Cormet manufactures various kinds of tools for high-pressure high-temperature water-chemistry monitoring and electrochemical testing.These sensors operating in high-temperature high-pressure environments.
- Ag/AgCl reference electrode
- Pd/H2 reference electrode
- Corrosion probe and redox electrode
- High temperature pH sensor
- Conductivity sensor
Controlled-flow instruments: Controlled-flow instruments are used for flow-accelerated corrosion and inhibitor studies. Rotating electrodes(RDE.RRDE,RCE &RC)are used to study corrosion inhibitors in oil and gas industry environments.
- Shear stress Applications
- Jet impingement
- High-speed loop
- Rotating electrodes
Test loops: Recirculation loops are used in laboratories to provide an environment that is similar to a plant environment (water, steam, supercritical fluid). Temperature, Pressure, Water chemistry, Dissolved gases and Flow rate parameters can be simulated.
- Temperature: 0°C – 650°C, typical 350°C
- Conductivity: < 0.1 μS/cm if water reasonably clean
Laboratories: Cormet has built laboratories for corrosion-testing purposes in H2S-environment and instrumented corrosiontesting devices in hot-cell environments. Laboratory projects are always customised turn-key deliveries, including instruments, installation&Training.
- Built in a building or in a container
- Gas sensors, personal gas alarms and protection devices.
ONLINE CORROSION MONITORS
Online Corrosion ER/LPR Comprehensive range of electrical (ER) and linear polarization resistance (LPR) measuring probes. Used for measuring corrosion in process applications, refining & processing, chemical production, water treatment & distribution and industrial applications
- ER probes available in a wide variety of configurations
- LPR probe available in either 2 or 3 electrode
- Wide range of probe available
CEION High Precision Corrosion Combining resolution and lifespan within one probe eliminating the traditional trade off with ER technology. Configurable technology allowing the measurement of both erosion and corrosion from one technology platform
- High resolution
- Real-time metal loss measurement
- Built in calibration and temperature compensation
- Data output in engineering units-contained, easy to use.
Corrosion Monitoring Ultrasonic The corrosion-erosion monitor consists of a head unit and up to 32 smaller transducers. Acoustic signals are converted to digital signals and transfer it to safe area. Equipment which converts signals to indicate remaining wall thickness.
- Retrofit installable
- large coverage area
- Accurate/high resolution
- Possibility for tomography
- Real time
- Non intrusive